Seecode tube HF920 Bedienungsanleitung Seite 50

1. Press button to enter the main menu. Select
When you hear voice prompt "Please select Tube from mobile phone and enter pin code 0000" and see
icon indicator
2. Start "IVT BlueSoleil". Select My Bluetooth>Bluetooth Device Discovery on the software menu bar to
search for the Bluetooth device.
3. After Seecode Tube is found, right-click Tube, and then select Pair Device .
4. Enter passkey 0000.
5. After the paring succeeds, red √ will be displayed before the device name Tube. Right-click Tube and
select Connection>Bluetooth AV Service to establish AV service connection between IVT and Seecode
Tube.
6. To remotely control the play of the music on PC, you can start Windows Media Player and set the
speaker interface to Bluetooth AV/HS Audio after establishing AV service connection.
7. Restart Windows Media Player. You can now listen to the music on Seecode Tube. For how to control
the music playing on PC, refer to section 2.7.2.
8. For voice communications such as chatting over the Internet, you must disconnect Bluetooth AV Service,
and connect Bluetooth Headset Service. First, right-click Tube, and select Disconnect>Bluetooth AV
Service.
9. Right-click Tube, and then select Connect> Bluetooth Headset Service. When you hear the indicating
tone, press button
10. After connection is established, start Control Panel and select Volume and Audio Device. Change
default device to Bluetooth AV/HS Audio. Now you can talk over the microphone of Seecode Tube.
Note:
1. When Bluetooth AV Service connection is established, you can remotely control the music play by using
Seecode Tube, such as play, pause, select music, and control volume up and down. However, you cannot
speak through the microphone of Seecode Tube.
2. When Bluetooth Headset Service connection is established, you can listen to the music and talk over the
microphone. However, you cannot use Seecode Tube to remotely control the music playing.
If you use Bluetooth windows driver other than IVT's BlueSoleil, you may follow software vendor's user manual to
complete paring and connecting Seecode Tube with your USB dongle.
.
displayed on the screen, the pairing succeeds.
to set up the connection.
and then select Activate.
Seecode Tube User Manual
18