Pairing And Connection; Pairing With Bluetooth Handset; Delete Pairing Records; Quit Pairing With Bluetooth Equipment - Seecode tube HF920 Bedienungsanleitung

2.5 Pairing and Connection

2.5.1 Pairing with Bluetooth Handset

Before making or answering calls, you must pair Seecode Tube with your handset. Paring sets up a unique
relationship between the two and lets the handset memorize Seecode Tube's unique ID (or passkey). This ensures
that calls will always be carried over a unique encrypted wireless link.
The pairing procedure is as follows:
1) Place Seecode Tube close to your Bluetooth handset, and ensure both Seecode Tube and the handset are
powered on.
2) Press button to enter the main menu. Select
"Please select Tube from mobile phone and enter pin code 0000" and see
indication that Seecode Tube has successfully entered the paring mode.
3) Follow your phone user guide to activate Bluetooth device search on the phone. You will see a list of
Bluetooth equipment on your phone screen at the end of the searching process.
4) Select Tube from the list and initiate pairing following handset's on-screen prompts. Enter passkey "0000"and
confirm to pair Seecode Tube with your handset. Once the pairing procedure is completed, you will hear voice
prompt "Pairing successful". It indicates that Seecode Tube and the handset are paired.
Note: Seecode Tube will remain in the pairing mode for about 2 minutes. If paring cannot be finished within 2
minutes, Seecode Tube will enter into the standby mode and the icon indicator
repeat the above steps to restart the pairing process.

2.5.2 Delete Pairing Records

Seecode Tube can save the pairing information of up to 8 Bluetooth devices. To delete all the paring records stored
in Seecode Tube, perform as follows:
1) Press button
to enter the menu.
2) Select .
3) Press button .
4) Select Erase.
5) Press button .
Seecode Tube will enter the pairing mode automatically when the pairing records are deleted.

2.5.3 Quit Pairing with Bluetooth Equipment

When Seecode Tube is in pairing mode, press button
indicator will disappear.

2.5.4 Connecting/Disconnecting Seecode Tube with Bluetooth Handset

Seecode Tube can communicate with Bluetooth equipment only when the Bluetooth connection between the two
equipments has already been established.
Connecting Seecode Tube with Bluetooth handset
.
, and then select Activate. When you hear the voice prompt
to exit pairing mode and enter standby mode. The icon
Seecode Tube User Manual
shown on the screen, it is an
will disappear. You need to
13