Install The Camera; Installation Tips - Reolink Go Ranger Pt G450 Bedienungsanleitung

Install the Camera

Installation Tips

•For better motion detection
performance, it is recommended
to position the camera
perpendicular to the expected
movement of wildlife.
• It is recommended to install
the camera about 2 meters (7ft)
above the ground to maximize the
detection range of the PIR motion
sensor.
• Do not face the camera towards
any light sources.
• Do not point the camera towards
a glass window. Otherwise, it may
result in poor image quality
because of the window glare
caused by infrared LEDs, ambient
lights or status lights.
NOTE: Mount the camera where
there are few trees to ensure
better monitoring.
11 English
Install the Camera on a Surface
1
Install the Camera on a Wall
If installing on a wood surface, hold the security mount in place and screw it directly into
your wall.
If installing on a masonry surface like stucco or brick, drill holes in a slightly angled way in
accordance with the mounting hole template, then insert wall anchors before screwing the
security mount into your wall.
NOTE: Avoid using drills which could damage the bracket.
English 12