Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Install the Camera
• Install the camera 2-3 meters (7-10 ft) above the ground. This height
maximizes the detection range of the PIR motion sensor.
• For better motion detection performance, please install the camera
angularly.
NOTE: If a moving object approaches the PIR sensor vertically, the
camera may fail to detect motion.
Mounting Height:
2-3 Meters
PIR Detection Distance:
2-10 Meters
13
English
θ
Installation Tips
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Otherwise, it may
result in poor image quality because of the window glare caused by
infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a
well-lit area. Otherwise, it may result in poor image quality.
• To ensure best image quality, the lighting condition for both the camera
and the capture object should be the same.
• Make sure the power port is not directly exposed to water or
moisture and not blocked by dirt or other elements.
• The waterproof camera can work properly under conditions like rain
and snow. However, it doesn't mean the camera can work underwater.
English
14
Werbung
