Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remixing mode:
2
Keep the on/off switch of the machine pressed down and move the stirrer
carefully into the bowl.
The mixing station switches on as soon as the protective grille is closed
and thus allows the stirrer to be dipped into a mixture which has already
been mixed. The on/off switch can be released as soon as the stirrer is
running. Secure the closed protective grille.
Caution!
Use this mode only for remixing.
Pay special attention when carrying out this type of mixing.
Prepare the mix as follows:
Always start the tool without load.
Depending on the material to be processed, proceed as follows:
Floor and Wall Tile Adhesives
Carefully read the instructions on the material bag.
To prepare the desired quantity of adhesive, fill the required quantity of
water into the bucket.
Switch the tool on. Add the content of the first bag (25 kg) with a feed of
approx. 10 kg/min through the protective grid into the bucket.
Continue to do so in an uninterrupted and regular way with the second bag
(25 kg).
To remix material which is already in the
bucket, set the switch pin (A) to position
2 using the locking mechanism (B)
(see illustration).
B
Turn the stirrer as shown on the left before
closing the protective grille.
This prevents the stirrer from touching the
mortar bucket as it is tilted downwards.
Caution!
Wear protective gloves.
22
Werbung
