Eibenstock Automix 90 Originalbetriebsanleitung Seite 20

Now the protective grid with the
machine holder
3
bucket and can be connected with
the framework by means of the
locking bolt (b) and spring cotter pin.
.
Then mount the motor
machine holder by means of the 4
screws (e) and spring rings (f).
Open up the tool and mount the stirring rod.
can be put on the
4
on the
7
b
Mount the safety switch
the both screws (d), spring rings
(g) and Nuts M5 (h) on the
protective grid with machine
holder.
3
20
c
with
7