Routine Maintenance; Adding Oil; Changing Oil - Vevor 3T Bedienungsanleitung

ROUTINE MAINTENANCE

Proper quantity of oil should be maintained, otherwise the specified lifting
height would not be reached.
To avoid damaging, the jack should be kept from shocking while in
operation.
The jack is not allowed to stand on one side or upside down.
This product is not suitable to the operation environment full or acid
alkaline corrosive air.

Adding oil

1.With saddle fully lowered and pump piston fully depressed, set jack in its
upright, level position. Remove oil filler plug.
2.Fill until oil is level with the filler plug hole,reinstall oil filter plug.
Oil (G8443-84)N15

Changing oil

For best performance and longest life , replace the complete fluid supply at least
once per year.
1.With saddle fully lowered and pump piston fully depressed, remove the oil filler
plug.
2.Lay the jack, on its side and drain the fluid into a suitable container.
Note: Dispose of hydraulic fluid in accordance with local regulations.
3.Fill with good quality jack oil. Reinstall oil filler Plug.
- 5 -