Setup Menu - Sonoro RELAX SO-810 Bedienungsanleitung

*DAB information (if available) includes: Station name, Dynamic Label
Segment (DLS), Signal strength, Program type (PTY), Ensemble Name,
Frequency, Signal error rate, Bit rate and audio status, Codec, and Time
and date.
8.2

Setup menu

Press SETUP in the DAB mode to access the setup menu (see chapter
"Using the menus"). The following options are available and the current
settings (if applicable) are marked with an asterisk (*).
▪ [Recall from Preset]
To recall a radio station in the preset list.
▪ [Save to Preset]
To store a radio station in the preset list.
▪ [Station List]
To display all available stations.
▪ [Scan]
To scan and store all available stations.
▪ [Manual Tune]
To manually tune the frequency. The list of available digital radio
ensembles is shown.
▪ [Prune invalid Stations]
To remove all invalid stations from the station list.
▪ [DRC]
Some DAB broadcasts offer dynamic range compression (DRC).
Compressing the dynamic range of a radio signal can increase the
volume of quiet sounds and reduce the volume of loud sounds. You
can select high, low or off level. High level is recommended for noisy
environment.
▪ [Station Order]
To define how the stations are listed when browsing the station list.
Options are:
▪ [Alphanumeric]: Arrange the stations in alphabetical order,
▪ [Ensemble]: List groups of stations that are broadcast together on
the same ensemble, and
▪ [Valid]: List valid stations first, then off-air stations.
90
© sonoro audio GmbH 2017