Troubleshooting Instructions; Cleaning And Maintenance; Electromagnetic Compatibility Information - Bbluv Basa Bedienungsanleitung

normal body temperature of different people will be different,
and the personal body temperature will also change at
different times.
The following are the reference values for the definition of
fever in various parts of the human body:
Sublingual temperature ≥37.5°C (99.5°F)
Axillary temperature ≥37.2°C (99.0°F)
Rectal temperature ≥38.0°C (100.4°F)
*Data sources: ISO 80601-2-56: 2017/AMD 1:
2018, for information only. It is dangerous to
make self-diagnosis and treatment
according to the measurement results.
Please consult a professional doctor with the
measurement results.

TROUBLESHOOTING INSTRUCTIONS

Fault
Possible causes
Description
Battery runs out
The screen
does not
react when
Battery installation error
the power is
on or
equipped
with
After reloading the
batteries.
battery, the screen
remains blank
Hardware
failure
All ICONS on
the screen
flicker
Too low battery
The battery
voltage, causing
icon appears
failure to boot
on the screen
and flashes
Battery power
is running out
Battery icon
appears on
the screen
Anormal temperature
rise rule (e.g.,
measurement higher
than the process
shedding).
The measurement
temperature is higher
than the maximum value
of the thermometer range
The measured
temperature is below the
minimum value of the
thermometer
6
Solution
Please replace the new
battery and re-open
Please install the battery
correctly according to the
positive and negative pole
mark in the battery bin.
Please contact after sal e
Please contact
after sale
Please replace
the new battery
and restart.
Please replace t
he new battery
as soon as possible.
Please restart the
measurement. The
thermometer should be
properly placed at the
measuring site according
to the instructions
Please check the
measurement target i s
correct and re-measure
again.

CLEANING AND MAINTENANCE :

1.Please use a soft, dry cloth to gently wipe the dirt on the
mainframe. If the surface is more serious dirty, you can dip
some alcohol to wipe. Cleaning is recommended every 1
month.
2.Caution: Do not wash with water or use cleaners, diluents or
volatile oils containing abrasives.
3. After the thermometer measuring probe is soiled, please
use a soft cloth dipped in more than 75% concentration of
medical alcohol to cover the measuring probe end and
gently wipe it. If The wipe is still not clean, please contact
customer service.
4.If the thermometer measuring probe, button, display and
other parts are damaged, please contact the after-sales
service.
5. Do not put in direct sunlight, high temperature and
humidity, dust, near the fire, vulnerable to vibration shock
place custody.
6. When the thermometer is not used for a long ti m e, the
battery should be removed to prevent battery leakage.
7.When the " " icon appears on the thermometer display
screen, it indicates that the battery power is about to run out.
Please replace the battery as soon as possible.
8.We do not authorize any organization or individual to carry
out maintenance, please do not disassemble and adjust the
thermometer.
9.The thermometer has been tested and calibrated at the
time of manufacture. If you have any questions about the
function or measurement accuracy of the product, please
contact the dealer or manufacturer.
FINAL DISPOSAL
At the end of the product lifecycle, do not throw this product
into the normal household garbage, but bring it to a
collection point for the recycling of electroni c equipment.
Waste Electrical and Electronic Equipment can have
potentially harmful effects on the environment. incorrect
disposal can cause harmful toxins to build up in the air, water
and soil and can be harmful to human health.

ELECTROMAGNETIC COMPATIBILITY INFORMATION

WARNING :
Use of this equipment adjacent to or stacked with other
equipment should be avoided because it could result in
improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that
they are operating normally. Not use of accessories,
transducers and cables other than those specified or
provided by the manufacturer of this the FDTH-VO-13 could
result in in- creased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in
improper operation. Portable RF communications equipment
(including peripherals such as antenna cables and external
antennas) should be used no closer than 30 cm (12 inches) to
any part of the FDTH-V0-13, including cables specified by the
manufacturer. Otherwise, degradation of the performance of
this equipment could result. Guidance and manufacturer's
declaration - electromagnetic emission - for all EQUIPMENT
AND SYSTEMS
7