KKT KOLBE IND294 Benutzerhandbuch Seite 103

Setting the switch-off timer for both cooking zones
• If you want to activate the timer for both cooking zones,
repeat the procedure accordingly.
• When the timer is activated for both cooking zones,
the timer display always shows the lower remaining time.
A dot lighting up next to the corresponding power display
marks the cooking zone to which the display refers.
Example see illustration (1):
Cooking zone 1: Power level 6, remaining time 5 Min.
Cooking zone 2: Power level 5, remaining time 15 Min
• To display the remaining time for the other cooking zone,
touch the corresponding cooking zone selection key (2).
• After the shorter set time has elapsed, the corresponding
cooking zone switches off,
the time display changes to the other remaining time
and the dot flashes on the corresponding power display.
Example see illustration (3):
Cooking zone 1: Cooking zone switched off,
remaining time expired
Cooking zone 2: Power level 5, remaining time 10 Min.
• When also this remaining time finally expires,
the corresponding cooking zone is also switched off
and the time display switches off.
Deleting and changing the timer setting
• To delete the timer setting, touch the cooking zone
selection button of the cooking zone for which
you want to delete the timer setting, if applicable.
• Touch the timer key
The timer is then cancelled.
• To change the time setting,
reset the timer as described above.
.
Operation and Setting
1
2
3
37