Sharp RP-TT95 Bedienungsanleitung Seite 5

Important safety instructions
Please follow all safety instructions and warnings. Keep
this manual for reference.
Consult user manual for safety, operation, and maintenance
information.
Class II equipment: Double insulation, no need for electrical
earth (ground) connection.
Alternating current (AC): Voltage marked is AC.
Direct current (DC): Voltage marked is DC.
Indoor use only.
Energy efficiency marking with level VI
Polarity of d.c. power connector
Precautions
Damage
Inspect the product after unpacking; if damaged, do not use and
consult your dealer.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
User should not attempt repair nor expose the internal parts; this action
can be hazardous and will void your warranty. Contact only authorised
service centers for repairs.
Power connection and accessibility
• Do not handle the power cord with wet hands. Do not force the plug
into the outlet. Turn off and unplug the product when not in use.
Keep the power plug accessible, without using extension cables.
Power source
• Use only AC 100-240V 50/60Hz outlets. Higher voltages can cause
malfunction or fire.
• The AC power adater should be removed from the power outlet if not
in use for an extended period of time.
• Only use the supplied mains adapter. Failure to do this may result in a
safety risk and/or damage to the product.
Power cord protection
• Protect the power cord from damage; do not overload, stretch, or
bend it. If damaged, it can result in fire or electric shock. Damaged
cords must be replaced by the manufacturer or a qualified technician.
Fused moulded power plug (non-rewireable) - UK, Malta, Cyprus
and Ireland only.
• The power lead includes a 3A Amp fuse. Replace only with a BS1362
approved fuse of the same rating.
Child safety
• Use basic safety precautions around children to prevent misuse of
the product.
Location
• Place on a flat, stable surface without overhang. If wall mountable,
refer to the wall-mounting instructions in this user manual.
Ventilation
• Do not block, cover or insert objects into the ventilation slots. Do
not insert objects into the product's openings. Doing so may result
in a safety risk and/or damage to the product. Ensure a minimum
distance of 5 cm around the product for sufficient ventilation to avoid
overheating.
Heat and operating temperature
• Do not place the product near heat sources or direct sunlight for
prolonged periods.
Naked flames
• Keep open flames away from the product to prevent fire.
Water, moisture, and liquid entry
• Do not expose the product to liquids; keep away from rain, water, and
objects filled with liquids to prevent fire or electric shock.
Storms and lightning
• Disconnect all cables during storms or lightning to prevent damage.
Maintenance
• Disconnect power cords from the product before cleaning and use
a soft, dry cloth without chemicals or detergents. If using a vacuum
cleaner, use the soft brush attachment.
Batteries
Installation
• Use only specified batteries; do not mix types or new with old. Use the
correct polarity upon battery insertion.
Use and maintenance
• Keep batteries away from heat, such as near fire or in direct sunshine.
Remove batteries if unused for over a month to prevent leaking.
Replace leaking batteries inside the battery compartment.
Child safety
• Ensure battery compartment is secure. Keep batteries away from
children's reach. Seek immediate medical help if swallowed.
Environmental conditions
• Keep batteries away from low pressure or high heat to avoid
explosion or leakage.
Disposal
• Dispose of the battery pack according to the manual (see "Disposal:
equipment and batteries"). Do not throw into fire, disassemble or
recharge non-rechargeable batteries, as it may leak or explode.
Disposal: equipment and batteries
Information for users on collection and disposal of old equipment.
Symbol indicates product contains batteries per EU
Directive 2023/1542/EU; cannot be disposed with
household waste. Cd, Hg, or Pb shows battery contains
cadmium, mercury, or lead.
This symbol means that the product is designed and
manufactured so that it can be recycled and reused.
These symbols on the products, packaging, and/or accompanying
documents mean that used electrical and electronic products
and batteries should not be mixed with general household waste.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take these items for environmentally safe
recycling.
EN