Sharp RP-TT95 Bedienungsanleitung Seite 10

9
You hear playback noise.
ū Ensure the PREAMP switch on the back of the turntable is set
correctly.
ū If connected to a PHONO input, set the PREAMP switch to PHONO.
ū If connected to an AUX or LINE input, set the switch to LINE.
ū Mismatched settings may result in excessive noise or distortion.
The sound pitch is too high or too low.
ū The wrong rotation speed may be selected.
ū Check the record label or jacket for the correct speed and press the
RPM button to select 33 1/3 RPM or 45 RPM.
ū The drive belt may be twisted or worn. Inspect and replace as
needed.
The sound pitch fluctuates.
ū The stylus may be worn. Replace it.
ū The drive belt may be stretched, worn, or broken. Replace the drive
belt.
The platter does not turn.
ū Ensure the AC adapter is properly connected to both the power
outlet and the DC IN 12V jack on the turntable.
ū Check that the drive belt is properly looped around the motor
pulley.
Playback is too quiet or distorted.
ū Verify that the PREAMP switch setting matches the type of input
jack on your audio device.
Using the wrong setting can result in low or distorted output.
Bluetooth connections.
You cannot pair with a Bluetooth playback device.
ū If other nearby playback devices also have Bluetooth enabled, they
may interfere with pairing. Disable Bluetooth on those devices and
try again.
ū If an unintended device connects automatically, adjust its Blue-
tooth settings to prevent auto-connection or power it off before
retrying pairing.
ū Pairing methods may vary by device. Refer to the playback device's
manual if needed.
You cannot connect to a smartphone, TV, or computer.
ū The turntable's Bluetooth function is transmit-only. It can send
audio to Bluetooth speakers or headphones, but it cannot receive
audio data or pair with smartphones, TVs, or computers.
The Bluetooth range is limited.
ū Disconnect other electronic devices connected to the turntable or
playback device to reduce interference.
ū Avoid plugging the turntable into an outlet shared with a micro-
wave or high-interference appliance.
ū Place the turntable on a non-metal table to maximise wireless
performance.