Kinetec Data Capture Benutzerhandbuch Seite 20

Warnings and safety instructions
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
Presentation
The KINETEC DATA CAPTURE™ software, coupled with the hand controller of the KINETEC Spectra™, KINETEC
Optima S4™ and Kinetec Centura™ Shoulder passive mobilisation appliances, lets you:
- program the appliance,
- produce appliance usage reports per patient.
KINETEC DATA CAPTURE™
We strongly recommend disabling your anti-virus and closing all active applications
before proceeding with the installation.
In case of power failure, a problem on the computer or a communications error, please
restart the current operation and check all the settings: patient name, program list and
daily program.
In case of power failure, a problem on the computer or a communications error, check
all the settings displayed on the hand controller. Repeat the operation if the data in the
hand controller is incomplete.
For maximum safety, the hand controller should always be given to the patient when the
machine is used in rehabilitation.
Always check the motion parameters displayed on the hand controller before starting the
rehabilitation session.
The patient report is printed solely for information.
The practitioner determines the protocol and ensures its proper implementation
(settings, session duration and frequency of use).
In case of mutual electromagnetic or other interference with other appliances, move the
appliance further away.
Modifying the appliance in any way is strictly forbidden.
EN 2/14