Editing Via The Operating Panel - LD LDDS21 Bedienungsanleitung

EDITING VIA THE OPERATING PANEL

The individual menu items and the main display with signal level display for the outputs left, right and subwoofer can be reached by repeatedly
pressing the PARAMETER button. The display automatically switches to the main display after approximately 15 seconds of no input. Settings
adjusted via the operating panel are stored, even if the device is restarted. However, we recommend saving individual settings as a preset via
the editing software (see "MANAGEMENT OF PRESETS").
MAIN DISPLAY
L: R:
Sub:
SUB VOLUME
Menu item for setting signal amplification for the subwoofer channel SUB. Set the amplification (GAIN) as required to between -60 dB and 6
dB with the EDIT rotary encoder.
SUB VOLUME
GAIN = 0.0 dB
SUB MUTE
Menu item for muting the subwoofer channel SUB. Select the desired setting with the EDIT rotary encoder (De-Mute = deactivate mute,
Mute = activate mute).
SUB MUTE
[De-mute]
SUB PHASE
Menu item for setting the polarity of the subwoofer channel SUB. Select the desired setting with the EDIT rotary encoder (0 = normal
polarity, 180 = inverted polarity).
SUB PHASE
[0]
SUB DELAY
Menu item for setting the signal delay of the subwoofer channel SUB. Use the EDIT rotary encoder to select the desired value between 0 ms
and 12.5 ms (in steps of 0.1 milliseconds).
SUB DELAY
Time = 0.0 ms
6