Before Use - Cecotec Perfectroast 3000 Inox Bedienungsanleitung

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
1. Grill plate
2. Power switch (in the rear part)
3. Fat and cooking juices drainage slot
Barbecue plate
4.
5. Handle
6. Barbecue-plate operation light indicator
7. Barbecue-plate temperature knob
Grease-collection tray
8.
9. Grill-plate operation light indicator
10. Grill-plate operation light indicator
11. Splashproof protection
12. Spatula
Please note
The graphics in this manual are schematic representations and may not exactly match the
product.

2. BEFORE USE

- This product includes a safety package to protect it during transport. Unpack the device
and keep the original packaging and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future. In case the original packaging
is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box contents
- PerfectRoast 3000 Inox /X/ M/ S/ T electric barbecue
- Grease-collection tray
- Cooking plates
- Splash-proof protection
- Cleaning spatula
- Instruction manual
26
PERFECTROAST 3000 INOX
- Clean the plates and the grease-collection tray with a soft, dampened cloth. Dry them with
a cloth or paper towel.
- It is recommended to spread some vegetable oil before preheating the plates to protect
their non-stick layer.
Warning
- Smoke might be observed during the first use due to residual wastes from manufacture.
- Make sure that the plate and grease-collection tray are clean and dry before operating
the product.
3. OPERATION
Plug the power cord into the outlet.
1.
2. Turn on the device by positioning the switch in the rear part in the On position.
3. Preheat the plate(s) by setting the temperature knob to the desired temperature: the
operation light indicator of the corresponding plate will turn red. When the device reaches
the desired temperature, the operation light indicator of the corresponding plate will turn
blue.
4. After preheating, place the food to be cooked on the plate. We advise you to use gloves
and tongs.
When the food is cooked, remove it from the plate; use the spatula to do so.
5.
6. When you finish using the barbecue, turn off and unplug it. It will take some time to cool
down, be careful.
7. When the barbecue is cold, remove the grease-collection tray and clean it.
Please note
- It usually takes about 8 minutes to preheat.
- You must make sure the grease-collection tray is correctly assembled in the barbecue.
- Do not use metallic utensils to place or remove food, as it could damage the coating.
Tips
- Remember that the cooking time and temperature depend on the type of food and
thickness.
- Always use tongs to turn grilled food. Using a fork to turn the food will dry it out and
damage the non-stick coating.
- You do not need to turn meat or fish more than once during the cooking process. There is
no need to turn it more than once, as it dries food out.
- If cooked food sticks to the grill plate, rub the plate with a piece of kitchen paper soaked in
oil from time to time
- Meat will be more tender if you marinade it in the refrigerator overnight before cooking.
ENGLISH
27
PERFECTROAST 3000 INOX