Flashlight Function - Green Cell Powerboost Air Bedienungsanleitung

Flashlight function

Powerbank function
The device allows you to charge other devices using the USB-A port. To charge other devices, connect the USB-A cable to the
device's USB-A port, then connect the USB-C plug to the device you want to charge.
Jump-starter function
PowerBoost Air allows multiple starts (with a charged battery – at least 50%) of internal combustion engines up to 5 L and diesel
engines with up to 3.5 L equipped with 12 V starter batteries.
Starting current: 500 A
●
Peak current: 1000 A
●
Voltage: DC 12-16.8V
●
Emergency vehicle start-up
Quick guide in a few steps:
● To turn on the flashlight, press and hold the button marked with the flashlight symbol.
● To change the lighting mode, press the flashlight button again.
● IMPORTANT: PowerBoost Air has an emergency light mode (red light beam).
To use the jump-starter function, find the EC5 socket on its housing. Prepare the clamps fitted with
the intelligent controller and find the EC5 plug on the end of the clamp. Insert the clamps plug into
the EC5 socket on the PowerBoost Air. Then connect the clamps to the car battery, taking care to
connect the red positive connector to the positive terminal of the battery and the black negative
connector to the negative terminal of the battery. The green LED located on the intelligent controller
on the clamps will communicate that the car is ready to start.
Now you can try to start the engine.
7