Reference Time Needed To Inflate An Item - Green Cell Powerboost Air Bedienungsanleitung

Current pressure display
PowerBoost Air allows you to check the pressure in the connected object. To do this, turn on the device and then connect it using the
appropriate tip to the item you want to check. The pressure value will appear on the display.
Using preset pumping modes
Selection of modes
Select the mode by pressing the function button. The modes will appear sequentially on the display.
To change the unit from psi to bar, kPa or kg/cm
To start pumping, press the on/off button. The device will automatically stop pumping when the pressure reaches the desired value.
Default value: 8 psi
Adjustable: 4-16 psi
Default value: 60 psi
Adjustable: 30-145 psi
Inflating tires
Before inflating tires, check the correct pressure for your tire. Typically, this information is located on the
sidewall of the tire. In cars, this information may also be located on the rating plate on the vehicle body.
Reference time needed to inflate an item
Item type
Car tire 205/55 R16
Bicycle tire 700 x 25C
Basketball
Values shown for a fully charged PowerBoost Air when inflating from 0 psi. The data are examples and may differ
from actual values.
2
, press and hold the function button.
Default value: 35 psi
Adjustable: 26-44 psi
Default value: 37 psi
Adjustable: 22-51 psi
Pressure value Example of time needed to inflate
36 psi 10 minutes 30 seconds
60 psi 2 minutes 10 seconds
8 psi 30 seconds
5