EDIFIER ES20 Bedienungsanleitung

EDIFIER'
— Quick Start Guide —
EN
1. EDIFIER Connex app
With this you can
• control play front the Bluetooth
source device,
• control the master volume,
• upgrade the firmware, and
• functions.
Download EDIFIERConneXapp
1.With your smart device.scan the QRcode on the quick Start guide or the
packaging.
• You canalso searchfor •EDIFIER Conner in Apple App Store (iOSdevices)
Google Play(Android devices).
2. Downloadand installthe app.
How to use this app
1. Connect your srnart device with the speaker via Bluetooth.
2. In Bluetooth mode, open EDIFIER ConneXApp on your smart device.
3.Tap the
2. What's
Strap
• Imagesare for illustrative purpose only and may ciiffer from the actual product
• Forthe needOftechnical improvementand system upgrade.information and
specificationscontained hereinmay be slightly different from actual product.
If any differenceis found, the actual product prevails
3. Charging
5V=2A
• Power input: 5 V
• •5• is the minimum power required by the radio equipment to charge.
•10•is the maximum power requiredby the radio equipment to achieve
maximumcharging speed.
4. Power
Pressand holdthe • C) button for I.S secondsto power on/off the speaker.
5. Bluetooth
This speaker supports the
Connect to a
1. If no deviceis
poweredon (LEDblirking in blue).If rat. pressard hold
1 seconds.
2. Onyourdevice.
blue LED will be steady lit
• To discomect from
buttons for 1.5 seconds.
Connect to two devices
1. Comu.c- t to adevice.and
(LED bEnking in blue).
2. On tte secorxi device. sekct " EDIFIERES20•in its Bluetooth device list to connect.
ard the LED wil be steady lit wh•n tip connection is estabhshed.
3. On first device. select •EDIFIER ES20- in its Bluetooth
• Pause orstop playback on
secorxi one.
• Pin for comection
• TOenm all BluetoothfunctionsOfthis product.makeSurethat your audiosmjrce
device supports HFP, A2DP and AVRCPprofiles.
• If no device is connet«i
rmde. The blue iryiicator will blink slowly. In this mode, (1) new devkes cannot find
speaker, b ut (2)for a devicethat existsin the pairirg recordof this speaker, y ou
can select •EDIFIER ES20• from its Bluetooth
Bluetooth hidden '-node, press •
• After powered on, the speaker will reconnect to
6. Bluetooth
pair two ES20
1. Double press
pattern.
2. Doublepress
breathingpattern
• Once the connetion is
lit or bEnkrapidly,ard the white LEDon the secondES20 will light off.
3. COM•ect the first ES20 to your Bluetooth&vice and start playirg.
• To exit stereo rrx»de,double
• Thefirst ES20 will work as
• Thefirst ES20 will
channel audo.
7. Play control
8. Phone
9. Light effects
O N
10. Specifications
TotaloutBJtpower(RMS): 6 W
Frequetry
Decla ration for Eu
Frequercy Band: 2402 GHz- 2480 GHz
RFPower Output '13 dBm (EIRP)
There is rn restriction
11. Troubleshooting
Cannot connect to your
• Make sure that the distance between this product and your Bluetooth device
is less than 10 meters
• Make Sure that no device is connected to this product via Bluetooth.
• Make sure that this product is in Bluetooth pairing mode If not. manual-y
switch it to this mode.
• Restart this product. enable
and then try again.
NO sound
• Make sure that this product is powered on.
• Make sure that this product and your device is properly connected.
• MakeSurethat the playbackis not paused.
• MakeSurethat this product and your deviceare not muted,
• Increase the volume of this product and your device.
Noise coming from speakers
• EDIFIER speakersgenerate little noise. whilethe background noise of some
audio devicesaretoo high Pleaseunplug audiocables and turn the volume
up. If no soundcan be heardat 1 meteraway from the speaker,there is no
problern with this product.
To learn moreabout EDIFIER. p leasevisit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on
ww•w.edifier.com and review the sectiontitled Warranty Terms
USA and Canada: service@edifier.Ca
South America:Pleasevisit www.edifier.com(English)or
www.edifierla.com(Spani5h/Portuguese) f or localcontact information.
Portable Bluetooth
for settings and playbackcontrol.
in the box?
00
USB-C to IJSB-C
2 A
on/off
connection
the speaker will auto-erter Bkletoothpairingnxxie after
-EDIFIER E S20" i n its Bluetoothdevicelist to conrz:t. arylthe
current Bluetooth device, press
pressand
currentBoetoothdevicebeforestreaming
is
in 10 minutes, the speaker will switch to Bk'etooth hidden
stereo pairing
x2
EDIFIEREszo
to enjoy stereo sound.
• • button on the first ES20.The white LED will be in breathing
•O • button on
masterspeaker.
rightchannelaudio
calls
bl.ss
93 Hz-19 kHz
of use.
and there
ES20
Speaker
EDF286009
audio cable
U
ELHERES20
conrectbn Of two Bluetooth devices
isestablished.
the •4"
if
" tntton on the speaker.
secorxiES20. T he
tt•æwhite LED on the first ES20wil be steady
• • button.
OFF.
device
are no obstacles
function on your Bluetoothdevice,
EDIFIERConnex app
o ooo 00
QuickStart guide
01.ss
U
o I.Ss
•+4and
twld the
buttonsfor 1.5s«onds
device list to reconnect.
list to reconnect
last devkes
(5
x2
LEDwill be in
cancontrolplayon the first
the one is forthe left
—230
between them,
5-10
buttonsfor
and
from
To exit from