VEVOR RFS-500 Bedienungsanleitung Seite 7

STEP5:
Install the positioning pointer(not essential). Use a hex wrench
to fix the positioning pointer to the main framework with the screw.
TIPS
1. Before Line Striping, make sure to clean the ground and keep it dry.
2. Before spray painting, be sure to shake the paint thoroughly.
3. It's best to wear gloves when working to avoid getting paint on your hands.
4. Recommend a forward speed of 0.15m/s. But the effect is related to the type of paint,
forward speed, setting height, etc. Adjustments can be made according to the actual
situation.
5. For optimal results, please use high-quality striping paint spray like
RUST-OLEUM.Please use a flat nozzle, as shown in the following figure.
6