VEVOR HCT-378 Benutzerhandbuch

Technical Support and E-Warranty Certificate www.vevor.com/support
WATER TIMER
Model: HCT-378
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
INSTALL THE TIMER TO WATER TAP
1. Open the battery compartment cover and follow the +/- marks to place 2 new 1.5 V 'AA' alkaline
batteries.
2. Attach the water timer (already with a built-in filter) to an outdoor water tap.
3. An O-ring / adapter / PTFE tape can be used as a protection against water leakage.
4. Connect water pipes at the zone outlets with quick connectors if needed.
1. Intended for outdoor use only.
2. Do not use tools on the timer. Hand tightens enough.
3. Do not use water lower than 3 ℃ or higher than 45℃ .
TIPS:
• The water inlet must be equipped with a filter to prevent impurities from blocking the valve, which may
resulting in valve switch failure or water leakage. Please clean or replace the filter in time.
• The working water pressure for the timer is 0.05 - 0.8 Mpa. The timer itself does not generate pressure
and needs tap water pressure or water source with pressure to work well.
LCD Display
1. Display current time in 24-hour.
2. Indicates the battery power level.
3. Indicates the Delay mode is active.
4. Indicates the timer is watering.
5. Indicates the Child Lock mode is active.
6. Indicates currently selected zone area.
7. The first watering time for each program.
8.
Allows user to set run time from 1-59 sec or 1-360 min.
9.
Allows user to set interval period from 1-23 hours or 1-15 days.
10.
Automatic reminder: How much time is left until the next watering starts.
PROGRAM THE WATER TIMER
Set Current Time
1. Press button.
2. The current hour will flash. Use +/- buttons to change the hour, then press
proceed to set the minute.
3. The current minute will flash. Use +/- buttons to change the minute, then press
and automatically return to the main screen.
4. The current time have now been set.
Set hour Set minute
Manual Watering for Single Zone
• This feature allows users to water one-time without interrupting the set program for the selected zone.
1. Press button to select the zone you want and press
2. The run time number will flash. Use +/- buttons to change it from 1-59 sec or 1-360 min, then press
button to run the zone (only the selected zone will water).
3. Stopwatch starts and the symbol flashes on the screen.
5. If users want to cancel Manual Watering in midway, just need to press
Factory preset Set run time
Child Lock Mode for All Zones
• This feature helps to avoid mistaken operation and make the timer safe from children activities.
1. Press any button to light up the screen.
2. Hold + together buttons for 3 sec, then the symbol
3. If users want to cancel Child Lock mode, just need to hold
No Child Lock mode
View / Choose Watering Zones
1. In order to save battery power, if the button operation is not performed within 30 sec, the LCD display
will turn off. Press any button to light up the display if needed.
2. Press button repeatedly to switch the displays of Zone A, Zone B and Zone C.
3. The following figures show the factory preset programs for Zone A, Zone B and Zone C.
Zone A program
Zone B program
TIPS:
• In order to water with a normal water output for each zone, please do not open 2-3 zones at the same
time.
• The Company reserves the right to change the definition and upgrade the device without prior notice.
SPECIFICATION
Model HCT-378
Item Size 138×72×127 mm
Net Weight 510 ± 10 g
Ingress Protection IPX5
Power Supply 2 × 1.5 V 'AA' Alkaline Batteries
HOW LONG Run Time from 1 - 59 seconds or 1 - 360 minutes
HOW OFTEN Interval Period from 1 - 23 hours or 1 - 15 days
Size：140*100 mm
- 1 -
max. 4 weeks
please replace the batteries in time
too weak to open
the timer can not open to water
- 3 -
button to save and
button to save
Ready
- 5 -
button to enter the setting.
button once again.
Manual Wateing runs
- 7 -
shows on the screen.
+ buttons together for 3 sec again.
Child Lock mode activates
- 9 -
Zone C program
- 11 -
Working Pressure 0.05 - 0.8 Mpa
Working Temperature 3 - 45 ℃
Water Inlet 3/4〃Internal Thread
Water Outlet
3/4〃External Thread
- 13 -
WATER TIMER
User Manual
Please read the user manual carefully before use and keep for future reference.
COMPONENTS
Battery Compartment Cover
Zone Outlets with 3/4〃external thread
Control Buttons
1. button Allows current time to be set.
2. button Selects Zone A, B or C to be set the program.
Returns to the main screen. /
3. button
Allows user to discontinue the programs (hold for 3 sec).
4. button Allows user to activate a one-time watering of a single zone.
5. button
Decreases the selected item flashing in the display.
Increases the selected item flashing in the display. /
6. button
Postpones to water for an interval period (hold for 3 sec).
7. button
Enters into the program setup / Confirms the options set.
8. function
Child Lock mode (hold
Set Start Time, How Long, How Often
1. Press button and choose the aim zone, then press
2. The hour will flash. Use +/- buttons to change it, then press
the minute.
3. The minute will flash. Use +/- buttons to change it, then press
how long setting.
4. The run time number will flash. Use +/- buttons to change it from 1-59 sec or 1-360 min, then press
button to save and proceed to how often setting.
5. The interval period number will flash. Use +/- buttons to change it from 1-23 hours or 1-15 days, then
press button to save.
6. Start time, how long and how often for one zone have now been set. Next Start will automatically
update in real-time and remind users how much time is left until the next watering starts for this
program.
Set hour Set minute Set run time
Delay Mode for All Zones
• This feature allows users to postpone watering for an interval period without interrupting the preset
program for all zones.
1. Press any button to light up the screen.
2. Hold button for 3 sec, then the symbol
3. If users want to cancel Delay mode in midway, just need to hold
No Delay mode
OFF Mode for Single Zone
• This feature allows users to discontinue the watering program for the selected zone. The program is
saved and will be resumed after the OFF mode removed.
1. Press button to select the zone you want.
2. Hold button for 3 sec, then the character OFF shows on the screen.
(only works for the selected zone).
3. If users want to remove OFF mode, just need to hold
No OFF mode OFF mode activates
Low Power OFF Mode for All Zones
• The water timer will automatically turn into Low Power OFF mode when the battery power is low.
The symbol will flash on the screen and the timer can not open to water anymore. In order to work
well, please replace new batteries and reset the programs as soon as possible.
TROUBLESHOOTING
No display when the batteries are installed.
• No battery power. Please place new batteries properly as per the mark of +/-.
Display reads: "Er00"/ "Er01"/ "Er02"
• Circuit in a abnormal state. Please reinstall the batteries.
Water does not come out at the preset time.
• A program is being set up for the zone at this moment.
• Delay mode / OFF mode is on. Clear if necessary.
• Low Power OFF mode is on. Please replace new batteries.
• The faucet is turned off. Please turn it on.
The water inlet / outlet leaks.
• The filter is not well pressed to the end of the tap connection. Please reinstall it well.
• The water inlet / outlet / water pipe is broken. Please check.
• The water tap / water pipe has different thread consistent with that of the water timer.
Use an appropriate adapter, O-ring, quick connector or PTFE tape if needed.
E-CrossStu GmbH
Mainzer Landstr.69,60329 Frankfurt am Main.
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147,Centurion House,
London Road,Staines-upon-Thames,Surrey,TW184AX
Manufacturer: Ningbo Hanci Electrical Co., LTD.
No.127 -129, Dexing Road, Ninghai County, Ningbo City, China. 315600
Water Inlet with 3/4 〃 internal thread
LCD Display
Control Buttons
- 2 -
+ together for 3 sec).
- 4 -
button to enter into start time setting.
button to save and proceed to set
button to save and proceed to
Set interval period Ready
- 6 -
flashes on the screen and next start gets updated.
button for 3 sec once again.
Delay mode activates
- 8 -
button for 3 sec again.
Low Power OFF mode activates
- 10 -
- 12 -
- 14 -