Removing The Cover - Grundig Rpc 200/A Serviceanleitung

Notes for service
When dismantling the machineor removing single sections
please observe the following:

Removing the cover

The cover can easily be pulled out of its hinges. Do not
bend the brackets.
Removing the record player
(Secured for transit, see view A).
I. Remove two self-tapping screws.
2. Turn transit securing screw clockwise until it slides
down approx. 15mm (view B).
3. Slide record deck to the right and loosen locking de-
vice (see drawing), using suitable screwdriver.
4. Lift record deck on the left hand side and unhinge
transit screws (view C).
5. Loosen plug connections and take out record deck.
Secured for
Play position
transit
For repairs on the record player the service manual etc.
can be obtained from Audiodecks Ltd., P.O. Box 7, Sand-
beck Way, Wetherby,W. Yorks. LS224YS; or Dual Ge-
brüder Steidinger, D 7742St.Georgen/SchwarzwaId, W est-
Germany.
Removing the top section of the cabinet
For the purpose of easier handling it is advisableto re-
move the record player as described above.
Removethe 5 bottom screwsmarkedby circles (RC100,
2006 screws) and 4 screwsfrom the rear. TakeOff fuse
cover and pull off mains cable. Slightly lift up top part of
cabinet with cassettedeck, push backwards, t ilt up the
front and pull of the 3 plug connections.Now the top
part with cassette deck can completely be lifted off.
130378 Ni
Mechanical Section
After removalof record player and the top part Of ca-
(see ill.).
Dismantling
c
Removing the cassette recorder
binet, unscrew the 4 cassette deck mounting screws
o