Decoderwerk 10102 Benutzerhandbuch Seite 19

Commissioning
The decoder is designed for switching a relay
◆
and has one output with 3 connections.
The middle connection is connected to
◆
either the red
depending on the command.
Connect outputs
or green connection,
Performance
30V DC voltage
◆
30V alternating voltage
◆
2A current
◆
Memory
The relay is bistable and automatically retains the
last selected position.
Switches
The relay does not supply the
◆
connected loads with voltage.
The relay completely isolates the decoder from
◆
the connected load
6