Electric Oven; Cleaning The Interior; Main Components; Glass Ceramic Hob - Bartscher 650 Snack 115.059 Anleitung Für Installation, Betrieb Und Wartung

16.2

ELECTRIC OVEN

Replacing the heating element
• Working inside the oven chamber and from behind of the
appliance, disconnect the heating element and remove the
screw from the fl anges.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the fan (mod.ventilated oven)
• Remove racks, rack-holders and fan protection from inside
the cooking chamber.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the fan motor (mod.ventilated oven)
• Remove the fan protection from inside the cooking chamber.
• Remove the posterior panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the temperature thermostat, the control knob,
the indicator lamp and the safety thermostat
• Remove the control knob.
• Remove the front panel
• Disconnect the component from the wiring.
• Remove the bulb from the support bracket on the inside of
the oven chamber (thermostat).
Replacing the door seal.
• Remove the seals ( fi tted in place around the edges ).
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.

17 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

18 MAIN COMPONENTS

18.1

GLASS CERAMIC HOB

• GLASS CERAMIC HOB
• Indicator light
• Radiant hotplates
• Energy regulator
18.2 ELECTRIC OVEN
• Control knob
• Working thermostat
• Safety thermostat
• Heating element
• Indicator light
• Fan motor (mod.ventilated oven)
• Door seal
21