Environmental Concerns; Packaging Materials; Disposal Of The Appliance - Zanussi ZFU219WO Benutzerhandbuch

1. Press the spacing bracket on both sides with your
fingers.
2. Place the bracket between the condenser vertical
bars and within the highlighted areas.
Condenser
Rear spacer
Insert here
3. Release finger pressure on the spacer and make
sure it is secure.

Environmental concerns

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
Levelling
The appliance should be level in order to eliminate
vibration. To make the appliance level, it should be
upright and both adjusters should be firmly in contact
with the floor. You can also adjust the level by screwing
out the appropriate level adjuster at the front (use your
fingers or a suitable spanner).

Packaging materials

The materials with the symbol
Dispose of the packaging in suitable collection
containers to recycle it.

Disposal of the appliance

1. Disconnect the mains plug from the mains socket.
2. Cut off the mains cable and discard it.
are recyclable.
15