Resetting To The As-Delivered Condition - HomeMatic HM-RC-4-2 Bedienungsanleitung

KeyMatic (HM-RC-Key4-2):
Once you have taught the wireless remote control in to
HM-RC-4-2_130816.pdf 1 20.08.2013 10:32:42
your HomeMatic wireless door lock actuator KeyMa-
tic, you can control the actuator easily using a button
pair (BP 1) and two individual buttons (B 3 and B 4).
The buttons in the pair represent a single unit for the
device you wish to control using the wireless remote
control.
You can use the button pair (BP 1) to lock or unlock
your house door. You can use the individual buttons
(B 3 and B 4) to open the door and switch the light on
or off.
BP 1
B 3
B 4
56
8 Resetting to the as-delivered
condition
You can reset the wireless remote control to its
as-delivered condition. If you do this, you will
lose all your settings.
To reset the wireless remote control to its as-delivered
condition, proceed as follows:
• Press and hold the teach-in button for at least 5 se-
conds. The wireless remote control's LED will start
to flash red slowly.
5 s
57