HomeMatic HM-RC-4-2 Bedienungsanleitung Seite 26

For this purpose, it needs to be taught in to the Home-
Matic central control unit first. New devices are taught
in to the central control unit using the HomeMatic „We-
bUI" user interface.
As soon as a component has been taught in to
a central control unit, it can only be connected
to other components via this unit.
Each component can only be taught in to one
central control unit.
During teach-in, please make sure you main-
tain a distance of at least 50 cm between the
devices and the central control unit.
To teach your device in to the central control unit, pro-
ceed as follows:
• Open the „WebUI" user interface in your browser.
Click the „Teach in devices" button on the right-
hand side of the screen.
• To activate teach-in mode, click „BidCoS-RF teach-
in mode".
• Teach-in mode remains activated for 60 seconds.
An information box shows how much teach-in time
remains.
50
• Within this teach-in time, you can also switch the
HomeMatic wireless remote control to configura-
tion mode by pressing its teach-in button briefly
using a pointed object.
• The wireless remote control will now be in confi-
guration mode. The device LED will flash green to
indicate this.
• After a short time, the newly taught-in device will
appear in the inbox of your software interface. The
button „Inbox (x new devices)" indicates how many
new devices have been taught in successfully.
• If required, you can teach in additional devices
by repeating the steps described above for each
device.
• Now configure the newly taught-in devices in the
inbox as described in the next section („Configuri-
ng newly taught-in devices").
51