Mapal SYSTEM HB Installations- Und Betriebs-Anleitung Seite 34

EN
EN
Tighten the clamping screw to the pre-
scribed tightening torque
34
34
Set the torque wrench to the tightening torque specified on the power
Tab. 2: Technical data of the clamping screw
chuck (see
Tighten the clamping screw with the aid of the torque wrench up to the
specified tightening torque.
R R E E S S U U L L T T
The tool is now fully clamped in the power chuck and can be used.
).
Montage- und Betriebsanleitung
Montage- und Betriebsanleitung
Installation and Operating Instructions
Installation and Operating Instructions