Jung RWM200 Betriebsanleitung Seite 51

DANGER
Danger from malfunction!
In the event of a battery error
message / contamination message, the
smoke alarm device may only con-
tinue to provide its reliable warning
performance for max. 60 days.
f It is necessary to replace the
smoke alarm device before the
remaining 60 days have passed.
Battery error message
A battery error message is triggered when
the device starts using its energy reserve.
With the battery error message, a sim-
ple tone will sound ever y 90 seconds
(see chapter 12 „Alarm and alert tones"
on page 57). Proceed as follows:
(1) Press testing / stop button to turn
off the battery error message for
24 hours.
(2) Replace the device.
EN
Operating Manual: RWM200 - Smoke Alarm Device
Contamination message
A contamination message is triggered
when the readjustment of the detection
electronics is no longer possible due to
heavy soiling.
With the contamination message, a dou-
ble tone will sound every 90 seconds
(see chapter 12 „Alarm and alert tones"
on page 57). Proceed as follows:
(1) Press testing / stop button to turn
off the contamination message for
24 hours.
(2) Replace the device.
Alarm without cause of fire
An alarm without fire is triggered under
the following circumstances;
Regular development of dust
•
in residential areas that are
promoted by textiles (e.g., carpets,
clothing, blankets and pillows)
Pollen, construction, grinding or fine dust
•
51