In Addition, Build-Up Of Fire Residues - Jung RWM200 Betriebsanleitung

measuring system of the device are not cov-
ered under warranty. Also smoke alarms or
warning signals associated with such forms
of soiling do not indicate a malfunction of
the device, but only show a lack of care,
cleaning and maintenance thereof.
Physical / mechanical damage
I f t h e d e v i c e h a s b e e n d a m a g e d ,
e.g. the housing has been broken or
the device has been opened, any war-
ranty claim shall be forfeited. The same
shall apply to subjecting the device to
any form of brute force, which does not
cause a physical damage to the device,
but causes a damage inside the housing
(e.g. of electronics).
Contamination
If the device is externally and / or internal-
ly contaminated by deposits (excessively
contaminated), any warranty claim shall be
forfeited. Paint and similar substances on the
surface of the device and within the housing
EN
Operating Manual: RWM200 - Smoke Alarm Device
/ measurement system of the device shall
be deemed contamination. Decoration /
painting limited to the release testing / stop
button (smoke alarm device cover) shall be
excluded from a warranty exclusion!

In addition, build-up of fire residues

(e.g. soot), as well as nicotine and grease
deposits, which have caused a readily de-
tectable discolouration of the device, are
categorized as contamination, which means
the loss of any warranty claims. Especially
nicotine and grease condensates do not only
gather on the outer surface of the device,
but also accumulate on the surfaces of the
optical measuring components. Particularly
there, the adhesion of condensates leads to
premature deterioration of the optical prop-
erties of the measurement components,
which the device can compensate through
autonomous recalibration only within its
physical limits.
Moisture damage / corrosion
If the device, and in par ticular its elec-
33