Jung RWM200 Betriebsanleitung Seite 40

3.2 Controls
Fig. 8 Controls
1 Splint pin (activation backup)
2 Activation button
3 Magnetic carrier
4 Smoke intake lamella
5 Testing / stop button
(smoke alarm device cover)
40
1
2
3
4
5
Operating Manual: RWM200 - Smoke Alarm Device
Splint pin (activation Backup)
The splint pin (activation backup) is used
during the transport of the device to pro-
tect against accidental activation.
Activation button
The activation button is used to turn the
device on and off.
Magnetic carrier
The magnetic carrier is used for fastening
the device.
Smoke intake lamella
Through the smoke intake lamella, fire
smoke reaches the interior of the device
and can be detected by sensors.
Testing / stop button
(smoke alarm device cover)
A self-test can be initiated using the
testing / stop button (smoke alarm de-
vice cover).
The testing / stop button (smoke alarm
device cover) can be actuated to interrupt
or stop the alarm and alert tones.
EN