6. Blades
If the blades are worn or break they can
be replaced. See fig. 5 Lack of mainte-
nance will lead to poor cultivating results
or overload of the engine. Always use
gloves when working near the blades.
The blades may only be replaced as a
set. Remove the outer lock pin and the
outer blades, then the inner lock pin and
the inner blades (fig. 5).
7. Lubrication
Important: Check and refill with grease after each 20
hours of operation.
Procedure:
Place the machine on its right side. Dismount the
knives. Clean around the filling hole to prevent dirt from
getting into the machine when the plug (17) is removed.
(fig. 6)
Fill up with new grease type Multifak so the level reach
the rim. Fit the plug (17) again.
Spare part no. for Multifak grease: 90306500
8. Maintenance and storage
After each use the machine should be cleaned completely for grass and dirt.
If you plan not to use the machine for several months all metal parts should be oiled to
prevent corrosion. Keep the machine dry and frost free
Only use original spare parts.
15