Starting The Engine - Texas A/S El-Tex 1000 Bedienungsanleitung

5. Starting the engine

Connect the power and make sure that the cord is fitted correctly in the cable holder
(fig. 2).
Start the machine by pressing the safety button A and then pull the handle B towards the
frame. When the machine has started, release A.
Stop the machine by releasing handle B (fig. 3)
Tips
Do not start the machine until you
are at the work area.
Always have both hands on the ma-
chine.
The blades will make the machine
move forward. Let the blades sink
slowly into the ground.
When you want the machine to work
in deep soil, the most effective way is
to let the machine move forward one
arm's length. Then pull the machine
back towards you. Then move forward again.
The blades must always run at the highest speed. Make sure they are not overloaded.
Use one of these work patterns when preparing an area for sowing. (fig. 4)
14