What You Need; Assembly Extempore Patchwork - Extremis Extempore Patchwork Montageanleitung, Gebrauchshinweise Und Nützliche Tipps Zur Pflege Ihres Werkzeugs Für Gemeinsamkeit

ASSEMBLY EXTEMPORE PATCHWORK

WHAT YOU NEED

2 people
no. 13 spanner
no. 4 hex key
+/- 15 min.
2. Put the 4 equal rods in the holes at the 4 corners.
4. Place the round aluminium pipe in the middle of the
tabletop. Make sure the holes in the tube are on the
opposite side of the table frame.
4 montage extempore patchwork
1. Place the tabletop upside down ( with the wooden part
down). Use the packaging as protection. Place the 2
supplied slats 35x35mm underneath the ends of the
tabletop.
3. Screw down the rods to the aluminium angle using
the eye-bolts. Make sure they are firmly tightened, if
possible by means of a screwdriver.
5. Put the wire terminals on the end of the cables in the
hole closest to the corner where the cable is fixed.