Extremis EXTEMPORE PATCHWORK Montageanleitung, Gebrauchshinweise Und Nützliche Tipps Zur Pflege Ihres Werkzeugs Für Gemeinsamkeit Seite 5

6. Now place a flat washer on each wire terminal and
screw a nut on it.
7. Now turn an extra nut on each wire terminal and
tighten it, in order to secure the first nut against
loosening.
Do so for the 4 cables and tighten the nuts up against
the inside of the aluminium tube. The nuts should be
wrenched firmly so that the cables should be sufficiently
under tension.
8. Now the legs can be put on the 4 corner pieces. The
legs should be fastened by turning the 2 small screws
on each leg with the supplied hex key.
english 5