Antenna Settings For Diseqc 1.0 And; Lnb Power - Beko B43L 5740 4B Bedienungsanleitung

SETTING FURTHER CHANNELS
If the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
12 Switch to the Channel Editor with »
(yellow);
or
press »EXIT« to end the setting.
Television / User Manual
-----------------------------------------------------
Antenna settings for DiSEqC 1.0
and searching digital channels
from a satellite automatically
Note:
The following description about the LNB
7
settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or »
«
3 Select the menu item »Source« with »
<
» « and press »
– »Source« menu is active.
4 Select the line »Automatic Channel Search«
with » « or »
V
confirm.
5 Select the option »Satellite (DVB-S/S2)«
with » « or »
V
confirm.
6 Select the line »Antenna Settings« with »
or » « and press »OK« to confirm.
Λ
– The »Antenna Settings« menu is displayed.
7 Select and set the required option for the
antenna settings with »
Satellite
Press »OK« then select the required satellite
with » « or »
V
confirm.
LNB Type
Press »OK« then select the required LNB
Type with »
data and confirm with » « (green).

LNB Power

Set the LNB power to »Off«, »13/18V« or
»14/19V« depending on the LNB type by
<
using »
LNB selection
See DISEqC mode.
« and press »OK« to confirm.
« to confirm.
V
« and press »OK« to
Λ
« and press »OK« to
Λ
« or »
V Λ
« and press »OK« to
Λ
< >
« or » «, enter the required
>
« or » «.
«, » «,
V Λ
>
« or
«
V
«:
73 / 88 TR