Connecting The Antenna And Power Cord - Beko B43L 5740 4B Bedienungsanleitung

CONNECTION/PREPARATION

Connecting the antenna and power cord

3
1 To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
antenna socket SATELLITE on the television
set;
and / or
2a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop or
indoor antenna to the antenna socket ANT
IN on the television set;
or
2b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket ANT IN on the
television set;
or
2c To receive analogue TV channels, connect
the cable for the rooftop antenna to the
antenna socket ANT IN on the television
set.
10 / 88 TR
-----------------------------------------------------
SERVICE
1 2
Optic Out USB(HDD) HDMI3(ARC) HDMI2 SATELLITE ANT-IN
13/18V
max. 500mA
Note:
When connecting an indoor antenna you
7
may have to try it out at different positions
until you get the best reception.
3 Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket
7
after you have connected the external
devices and the antenna.
Do not use an adapter plug or extension
7
cable which does not meet the applicable
safety standards. Do not make changes on
the power cord.
Television / User Manual