Beko B43L 5740 4B Bedienungsanleitung Seite 102

CONNECTION/PREPARATION
Setting up or hanging
Select a location so that no direct sunlight falls
7
on the screen.
Setting up with stand
To mount the stand, refer to the installation
7
instructions included.
Place the television set on a hard, level
7
surface.
Preparing for mounting on the VESA
bracket
You will need:
A pair of scissors,
7
A crosstip screwdriver.
7
Follow the installation instructions for the VESA
bracket.Place the television set in the film on a
smooth surface with the screen facing down.
1 Cut open the film on the back side using the
scissors.
2 Connect the required cables to the
connectors on the television set. See the
"Connection/Preparation" section in this
manual.
3 Tie the cables so they do not hang down
onto the floor.
4 Screw the VESA bracket onto the television
set and mount it according to its installation
instructions.
Television / User Manual
-----------------------------------------------------
VESA SERVICE
Optic Out USB(HDD) HDMI3(ARC) HDMI2 SATELLITE ANT-IN
13/18V
max. 500mA
11 / 88 TR