Picture /Sound Settings - Beko B43L 5740 4B Bedienungsanleitung

PICTURE /SOUND SETTINGS

Picture settings
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select menu item »Picture« with »
and press » « to confirm.
V
– »Picture Settings« menu is active.
Settings > Picture
Picture Sound
Picture Format
Picture Mode
Backlight
Advanced
Restore default display settings
Change Area
4 Select the required line »Picture Format«,
»Picture Mode« or »Backlight« with »
» « and press »OK« to confirm.
Λ
Select the option with »
Press »BACK < « to return to »Picture«
menu.
Note:
Other settings are available under
7
»Advanced«.
5 Select the line »Advanced« with »
» « and press »OK« to confirm.
Λ
6 Select the required line/function with »
or » « and press »OK« to confirm.
Λ
Select the value/option with »
and press »OK« to confirm.
Press »BACK < « to return to »Picture«
menu.
7 Press »EXIT« to end the setting.
26 / 88 TR
«, »
V
<
« or »
Tuesday
xx xxx xxxx
Source TV Timer Parental
16:9
Natural
Ec0
Back
BACK EXIT
V
< >
« or » «.
« or
V
V
< >
« or » «
-----------------------------------------------------------
Advanced picture settings
The "advanced picture settings" are in principal
digital image improvements which, however,
«,
Λ
should be only used when necessary when
picture quality and transmission is excellent.
>
They may well improve the display with poor
«
material, but may adversely affect the display
where transmission and picture quality are
excellent.
»Backlight« – Manual setting for back
7
lighting (only active if dynamic back lighting
is switched to "OFF"). This setting also
directly impacts power consumption.
»Vibrant Colour« – Increases the colour
7
contrast and the contrast adjustment. This
setting is mostly too strong for use with
normal pictures and should only be used
Exit
where necessary (low or off) otherwise
nuances in the image can be suppressed.
« or »Gamma« – This setting establishes which
7
brightness value should be displayed for
which digital transmission value. Most
recordings are transmitted with a gamma
value of 2.2 (all Windows PCs and
newer PCs with a MAC operating system
work with this, older MAC systems and
transmissions without colour profile mostly
operate with a gamma value of 1.8).
»Dynamic Contrast« – The function
7
dynamically and optimally adjusts the
« contrast for the respective picture content
by analysing images and then altering this
depending in a change in contrast. This
increase the contract, however may also
reduce the visible brightness levels in the
picture.
»Film mode« detects and processes feature
7
films automatically for all channel sources.
This means you will always receive an
optimal picture.
This functions in the modi 480i, 576i
and 1080i in TV playback and for other
channel sources.
If the »Film mode« is switched on for
programmes without a feature film signal,
minor problems such as picture freeze,
defective subtitles or fine lines in the picture
could occur.
Television / User Manual