Replacing The Fuse; Technical Specifications - EuroLite FL-300 Bedienunganleitung

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device except for the lamp and the fuse. Maintenance and service
operations are only to be carried out by authorized dealers.

Replacing the fuse

If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fitting illuminant:
Fuse:
Dimensions (LxWxH):
Weight:
Accessories:
OMNILUX GU-10 230V 18 LED blue
OMNILUX GU-10 230V 18 LED red
OMNILUX GU-10 230V 18 LED yellow
OMNILUX GU-10 230V 18 LED green
Please note: All information is subject to change without prior notice. 17.04.2013 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state): 60° C
C
230 V AC, 50 Hz~
21 W
45° C
0.5 m
0.1 m
GU-10 230V 18 LED
T 1 A, 250 V
350 x 350 x 145 mm
3.5 kg
No.:
88540456
88540457
88540459
88540458
12/12 00075825.DOC, Version 1.0