Function And Features - IFM Electronic EFECTOR 500 Bedienungsanleitung

Function and features

• The pressure sensor detects the system pressure,
• shows the current system pressure on its display,
• and generates 2 output signals according to the set output
configuration.
Switching function
(output 1 and output 2;
function can be selected for
each output separately)
Diagnostic function
(only output 2)
Applications (Type of pressure: relative pressure)
Order no.
PN7200
PN7201
PN7202
PN7203
PN7204
PN7206
PN7207
PN7209
Avoid static and dynamic overpressure exceeding the given overload
pressure.
For gaseous media the application is limited to max. 25bar.
Even if the bursting pressure is exceeded only for a short time the unit
can be destroyed (danger of injuries)!
High-pressure units (400 bar) are supplied with an integrated damping device
to comply with the regulations for UL approval and to avoid any risk of injury
in case of bursting when bursting pressure is exceeded.
When the damping device is removed
• the unit can no longer be used under UL conditions,
• the damping device can become unusable.
If you have any questions, please contact ifm electronic's sales specialists.
Measuring range
PSI bar
0...5 800 0...400
0...3 625 0...250
0...1 450 0...100
0...363 0...25
-14.5...145 -1...+10
0...36.3 0...2.5
0...14.5 0...1
-14.5...+14.5 -1...+1
hysteresis function / N.O. (Hno)
hysteresis function / N.C. (Hnc)
window function / N.O. (Fno)
window function / N.C. (Fnc)
OU2 = dESI; in case of a fault output 2
becomes inactive.
Permissible
overl. pressure
PSI bar
8 700 600
5 800 400
4 350 300
2 175 150
1 087 75
290 20
145 10
290 20
MPa = bar ÷ 10 / kPa = bar × 100
Bursting
pressure
bar
PSI
14 500 1 000
12 300 850
9 400 650
5 075 350
2 175 150
725 50
450 30
725 50
17