Lenz Digital plus GOLD maxi Informationen Seite 45

Function mapping:
57
Each bit of the CV stands for a function of the digital system:
-
Bit 1(0) for function 1, Bit 2(1) for function 2 and so on up to
59
Bit 8(7) for function 8. If you wish to allocate a function to the
dimming, the respective bit must be set.
57 0-255 Dimming (no ex-works setting)
0-255 Shunting speed (ex-works setting F3)
58
0-255 Switching off the delay (ex-works setting F4)
59
0-255 Lighting effect at function outputs A and B. The units digit of the
60
value stands for function output A, the tens digit for function
output B:
0 No effect
1 Marslight
2 Gyrolight
3 Strobe
4 Double strobe
61 0-255 Function mapping: lighting effect at function outputs A and B
62 0-255 Lighting effect at function outputs C and D.
The tens digit of the value stands
for function output D:
0 No effect
1 Flashing at same time as
function output C
2 Flashing alternately to function
output C
The units digit of the value
stands for function output C:
0 No effect
1 Flashing
2 Flickering type 1
(smooth)
3 Dimming with value
45
E
0
4
8
0
0
0