Day & Time; Kilowatt Value; Counters - Sentiotec Stp-Inface-T Bedienungsanleitung

3.5 Settings Menu and Keylock
3.5.1 Day and Time

3.5.2 Kilowatt Value

3.5.3 Counters

Confirm to reset
Long press Reset button
ACTUAL USAGE
4
The Settings Menu is only available in the OFF State.
Press not less than 5 seconds and release the button to enter
setup. A beeping sound will signal the change of menu status.
Here you may preset session time, temperature, fan, light,
perform steam generator maintenance and access to useful
information about your steam control system.
To lock/unlock screen, press more than 10 seconds the Settings
Menu button. Lock icon will appear on the display.
Select the day and time by pressing the day, hour
and minute button. Change values by short or
long pressing the buttons. Long pressing hour or
minute button will change numbers faster.
Set the correct kilowatt value of the steam
generator to the control (see kilowatt information
on your steam generator). Press the arrow up or
down to select. The default kilowatt value setting
at 7.5.
Counters display the usage of time and kilowatt of
the steam generator. This information is very
necessary to evaluate the need of a preventive
maintenance
consumption.
Pressing the Reset button will reset the ON hours
and kWh counters. Previous data cannot be
retrieved after resetting the counter.
Press reset button for 10 seconds to display the
actual usage information. This usage counter
cannot be erased. It shows usage of the control
panel since the manufacturing date.
and compute electricity