On Mode; Steam On; Day And Session Time; Temperature Setup - Sentiotec Stp-Inface-T Bedienungsanleitung

4. ON Mode

Steam ON

Aroma
(Optional)
4.1 Steam ON

4.2 Day and Session Time

4.3 Temperature Setup

8
Day and Session Time
Room Temperature
The steam generator produces steam during ON mode. In
this mode, you will find the steam button animated,
indicating that the steam session is ongoing.
Short press the Steam ON button to switch on Standby
Mode. Long press the steam button to switch OFF.
autodrain is present, steam generator goes to Drain Mode
and turns off after draining.
The day indicates current day which can be set in the Day
and Time setup in Settings Menu.
Session time is the remaining time of using the steam room.
The session time can be set until 24hours and it counts
down.
When Day and Session button is pressed, a setup screen
will appear. Use arrows up and down to change the session
time and hit OK when values are set.
Maximum length of the session time can be set on the DIP
switches. (See Steam Generator DIP switches on page 12).
The temperature button indicates either the actual or target
steam room temperature (refer to Control Panel DIP
switches page13). Press the up and down arrow keys to
change the temperature settings inside the steam room.
Light - Dimmer (Optional)
Fan (Optional)
If