Cleaning And Maintenance - Welltec Probot Rx11 Pro Bedienungsanleitung

Usage
Cleaning path
Place the device in the centre of the glass, as far away from the frame as possible and press the power
button briefly. When the robot detects the top edge, it will start cleaning horizontally from top to
bottom. When the cleaning is complete, the robot will return to the starting point.
Activate the X2 double cleaning mode for a more thorough cleaning. When activated, the robot will
clean the window twice.
Horizontal cleaning from top to bottom
Taking the device off the surface
1. When the device finished the cleaning or when cleaning has been stopped, hold the robot by its
handle and long press the power button to turn it off and then take it off the surface.
2. If you want to take the device off the glass, but it is out of reach, use the manual control on the remote
control or the WiFi app to bring it closer to you.
3. If you want to take the device off the glass, but it is out of reach and the manual control is not possible
(e.g. in the event of misplacing or discharge of the remote control), hold the safety rope on the robot's
end and carefully pull the rope along the glass to the point where you can reach the robot.
www.Welltec.pro 40
Robot maintenance schedule
Element Cleaning frequency
Cleaning cloths After each use
Tank Once a month
Spray nozzles After each use
Air outlet Every two weeks

Cleaning and maintenance

Proper care of your robot improves its durability and performance. Before cleaning the device,
disconnect it from the power supply.
Cloths cleaning
Frequent washing of the cloths significantly increases their
performance and service life. It is recommended to wash the cloths
by hand with a small amount of detergent under running water.
After washing, the cloths should be wringed and dried thoroughly
before the next use.
Tank
Pour out the cleaning solution from the tank. Rinse it with clean water and let it dry.
www.Welltec.pro
Replacement Cleaning method
Every 3-6 months Rinse under water and dry.
- Wipe with a dry, soft cloth.
In case of failure Wipe with a dry, soft cloth.
- Wipe with a dry, soft cloth.
41