Safety Information - Focus Dropper Post Informationsblatt

ADJUSTABLE SEATPOST
With a low seating position, you have more control over your bike in
challenging situations. If your bike is equipped with a dropper post, you
can adjust the height of the seatpost while riding. It is operated via a
remote lever on the handlebar.
Pressing the lever will raise or lower the dropper post. As soon as you
release the lever, the dropper post locks in position. If you have any
questions about the use and adjustment of the adjustable seatpost or if
you experience any problems, please contact your dealer.

SAFETY INFORMATION

WARNING
SERIOUS FALLS DUE TO A KINKED OR BROKEN SEATPOST.
• Use proper torque wrench for the tightening range when making adjustments.
• Ensure all quick-release systems are correctly tightened before you ride.
Check all quick releases before using.
• Only use your bike for its intended purpose. This may not include downhill.
• Check the seatpost regularly for damage and a secure fit, especially after
every fall. Do not ride it again if there is any damage. Replace the seatpost.
• Replace the seatpost after 14,000 kilometres regardless of the condition of
the material or whether or not defects or damage are noticeable.
• If you do not replace the seatpost in due time, it can break and cause serious
injurys.
INFORMATION SHEET: DROPPER POST
OVERVIEW
1
Seat clamp
2
Upper seatpost
3 1
Lower seatpost
4 Release mechanism
5
Cable
6 Remote lever
2
7 M4 screw (1.2-1.6 Nm)
8 Tension adjuster
9
Set screw (3-4Nm)
10 M6 screw (8-10 Nm)
3
4
8
7
6
5
10
10
9
EN
4