horntools ExRoof Serviceanleitung Seite 16

2.2
Place the roof rack feet (
secure them with the screws
tighten the screws
) remain movable.
3
3
Fig. 3
Fig. 4
30
, , ) on the roof rack platform and
1 2 3
and washers (see Figure 4). Do not
8 9
yet and make sure that the roof rack feet (
8
1
1
Subject to technical changes
, ,
1 2
2
2.3
Place the roof rack platform along with the roof rack feet (
on the vehicle roof. Check whether the openings in the mounting
brackets of the roof rack feet align with the mounting points on the
vehicle roof. Apply a light film of silicone to the threads of the screws
. If everything is correctly aligned, use
4
roof rack feet to the roof.
Fig. 5
3
Tighten the connection between the roof rack platform and the
roof rack feet
All 20 screws , which are screwed into the T-nuts
8
tightened according to the torque table and secured with thread-
locking adhesive (Loctite 243 or similar).
Subject to technical changes
, , )
1 2 3
, , and to secure the
4 5 6
EN
, must be
7
31