Technical Data; Optional Accessories - Kindermann Compact 80 Installationsanleitung

Function
Extremely flat ceiling lift for all customary data/video
projectors .
Low noise movements with concertina mechanism,
pre-installed power supply, spiral cable guide for safe power
and data supply .
The lift is powered by a single-phase condenser motor via a
3-gear maintenance-free planetary transmission and features
an electronic safety switch .
An electro-mechanical disc break allows exact stops . In case
of a power blackout or when switching theunit off the full
breaking power is available immediately .
Adjusting the two stop positions can be simply done with
the help of a programming unit (optional accessory
No. 7466 000 100 or 7466 000 101).
Delivery
For safe transport the ceiling lift is delivered in lifted
condition . It can be mounted immediately .
Supplied with flexible spiral for guiding the cables, and with
four extension arms for bottom tray, and four sets of screws
for fastening the projector!
A stencil for drill-holes (1:1) is included .
Fixing material for your ceiling construction is not
supplied!
Electronic
programming unit
10
Standard
programming unit

Technical data

Colour: Lift coated silver grey metallic
(RAL 9006)
Installation Compact 80:
measurements: min . 120 + X mm if projector
height is < 65 mm
(X = projector height – 65 mm)
e .g .:
projector height 100 mm =
155 mm installation height
Compact 120:
min . 140 + X mm if projector
height is < 85 mm
Projector mounting:
universal projector mount
Lifting range: Compact 80: up to 80 cm
Compact 120: up to 120 cm
Weight of the lift: Compact 80: 24 kg
Compact 120: 26 kg
Max. projector size: 35 x 50 cm
Max. projector weight:
20 kg
Power supply: 230 V, 50 Hz
Min. size of ceiling: 75 x 79 cm
Cutout of ceiling:
60 x 50 cm
Ceiling plate: optional
No . 7466 000 010 resp .
No . 7466 000 01 1

Optional accessories

No. 7466 000 010 Ceiling plate with T profile
for invisible mounting, integration of the ceiling cutout
(500 x 600 mm) in the lift
colour: matt white (RAL 9003)
No. 7466 000 011 Ceiling plate (550 x 650 mm)
standard version
for covering the ceiling cutout (500 x 600 mm),
colour: coated matt white (RAL 9003)
No. 7466 000 100 Programming unit standard
with 4-pin connection cable, for programming
the stop positions
No. 7466 000 101 Electronic programming unit
for more convenience, with 4-pin connection cable,
for programming the stop positions, reusable
No. 7466 000 015 Safety switch
Mechanical switch 230 VAC, 10 A, for cutting off the
projector from power when ceiling lift is lifted, stop
position adjustable .
No. 7466 000 020 Metal panelling
for visible mounting on the ceiling, 4 parts,
height 35 cm, white colour (RAL 9003)
No. 5699 000 020 Radio remote control
No. 5699 000 021 IR remote control
No. 5699 000 022 Motor control unit with relay inputs
No. 5944 000 001 Key switch
No. 5944 000 002 Up/down switch
10A/250 V AC, 2-pin, white, on wall mounting
No. 7466 000 012 Joint
with long spider arms for huge projectors