Hama PREMIUM X12CD Bedienungsanleitung Seite 10

g
4.2.2 Shred paper and plastic cards in the paper feed
shaft
■ Insert the paper or the plastic card into the centre of the feed shaft
(2). The cutting rollers are switched on automatically.
■ Let go of the paper or plastic card. The device switches back to
standby mode after shredding is completed.
4.2.3 Shredding CDs, DVDs, and BluRay discs
■ Slide the operating switch (1) to the "Rev/On CD" position. The
cutting rollers begin turning continuously and the device is ready
for cutting CDs, DVDs, or BluRay discs.
■ Insert the CD, DVD or BluRay disc into the centre of the feed shaft
(3).
■ Let go of the CD, DVD or BluRay disc. After shredding is comple-
te, slide the operating switch (1) to the "OFF" position in order to
switch the device off, or slide it to "On/Auto" to switch to standby
mode for paper and plastic card shredding.
4.2.4 Reverse run mode
NOTE!
►
■ Slide the operating switch (1) to the "Rev/On CD" position. The
rollers of the paper cutting system rotate in the opposite direction.
■ Slide the operating switch (1) to the "On/Auto" position.
■ Switch approximately three times successively between the posi-
tions "Rev/On CD" and "On/Auto".
■ Switch off the device and remove the jammed paper or plastic card
from the feed shaft (2).
10
These modes serve to remove any blockages in the cutter
system.
Premium X12CD