Cleaning And Maintenance - Eurel Basic Oa42 Gebrauchsanweisung

clockwise until it clicks into place.
5. Press the power button (7) to start
spinning.
6. The juice can be dispensed from the
juicer (3) during the juicing process.
At the juice spout (4), remove the lid
and replace the glass into which the
juice will be poured.
7. Once the juice has been poured
out, replace the juice spout with the
cover (4) to prevent dripping.
NOTE: The juice spout (4) is positioned
at a height of 13 cm, so you can put
taller glasses underneath.
NOTE: Switch off, dismantle and clean
the appliance after each use.
CLEANING AND
MAINTENANCE
Clean the appliance and all
components thoroughly after each
use.
Before cleaning, make sure the
appliance is switched off.
– To clean the juicing cone (2) – citrus
pulp residue, use the cleaning brush
provided.
TROUBLESHOOTING
Some problems that arise can be solved by the user. If you have not been
successful in resolving the problem, please contact the EUREL customer support
service.
Problem
The appliance
does not switch
on
The appliance
switches off
during operation
Possible cause
The battery is
empty
Parts not
assembled
correctly
Mechanical
overloading
– The removable parts (juicer lid
(1), juice container (3) and juicing
cone (2)) can be washed in the
dishwasher.
– Wipe the battery power base (5) with
a damp cloth.
– Store the appliance in a dry place.
Do not use abrasive cleaning
agents or sharp, metal objects when
cleaning individual components.
These can damage the external
surfaces of the appliance.
Make sure that no moisture gets
into the battery power unit (5) during
cleaning. This prevents damage to the
appliance and associated repairs.
ATTENTION! Surfaces may be
damaged. Do not use harsh
cleaning agents.
The device needs no maintenance!
Thorough cleaning ensures a long
lifespan for the device.
Solution
Charge the battery power unit with the
included USB-C cable (10).
Check and reassemble the appliance as
instructed.
Switch off the appliance, wait a few
minutes and switch it back on. For
detailed instructions on how to deal with
this situation, please refer to the section
PROTECTION AGAINST MECHANICAL
OVERHEAT.
20