• Make sure the adaptor is in perfect condition to avoid
a possible short circuit.
• Use only a USB type C charging cable. If the supplied
charging cable (10) is lost, use a type C charging cable
that can withstand an electric current of at least 1.5 A.
• Check the charging cable (10) before each charge. If
the charging cable (10) is visibly damaged, do not use
it and replace it immediately.
USE
Before first use, we recommend wiping
all parts with a clean, slightly damp
cloth to remove any dirt or dust. Dry
them thoroughly with a soft, absorbent
cloth.
ATTENTION! Do not use
abrasive cleaners, hard tools
or scrapers as they can damage the
surface.
PROTECTION AGAINST
MECHANICAL
OVERLOAD
The appliance is designed with a
mechanical overload protection
function.
If the appliance is mechanically
overloaded, the juicing cone (2) is
stopped. To reactivate the appliance,
press the power button (7).
Note: If you are unable to resolve
the fault, please contact our service
department.
CHARGING THE
APPLIANCE
The battery in your appliance is not
fully charged. To ensure optimal
performance, it is recommended to
fully charge the appliance before first
use. The LED indicator (8) shows the
charging status.
To charge the battery power base
(5), insert the USB-C charging cable
(10) into the charging port (9).
A full battery will be enough to
juice over 10 kg of citrus fruits. The
recharge time is about 2-3 hours.
Note: Do not leave the appliance
empty of charge for long periods of
time as this may affect the life of the
rechargeable battery.
Note: The appliance will not work
when plugged in and charging.
If you won't be using the appliance
for a long time, charge it completely
every 3 months.
The ambient temperature during
charging should be 20°C ± 5°C.
ON/OFF
1. Place the appliance on a flat surface.
2. Attach the juice container (3) and
juicing cone (2) to the battery-
powered unit.
3. Halve the citrus fruit and place it on
the juicing cone (2).
4. Replace the juicer lid (1) and turn it
19